Skip to content

Harmonic angle ​

Why an angle of its own ​

A radius function ρw(τ,θ) gives one wall point per direction θ from the centerline. It describes a cross-section only if every ray from the centerline point meets its wall once: if the section is star-shaped about it. A crescent-shaped lumen, a kidney-shaped one or a lobed one is not, and the centerline of a strongly curved section can even lie outside it.

furca therefore describes each section as a closed curve φ↦W(τ,φ) (Wall), parametrized by an angle φ that does not come from rays. The harmonic angle is that parameter: an angular coordinate on the wall surface itself, defined by a linear problem on the input mesh.

Definition ​

Let u be the harmonic field on the wall, 0 on the inlet and 1 on the outlet. On an annulus, the harmonic functions with zero normal derivative on both boundaries that increase by 2π once around the tube form a one-parameter family, φ+c: the conjugate of u, scaled to period 2π. The pair (u,φ) is a conformal map of the wall onto a cylinder, the classical way to flatten a tubular surface without distortion (Haker et al. [27]). Its level lines cross the level rings of u at right angles.

Two properties make it the right angle for a cross-section:

  • It reduces to the polar angle. On a straight tube whose section does not change along it, u is the normalized axial coordinate and φ is 2π times the normalized arc length around the section. On a circular section centred on the centerline, that is the polar angle θ, so the star-shaped model is recovered.
  • It needs no centre. It is defined by the surface alone, so it exists for any section shape, whether or not the section encloses its centerline point.

Construction ​

A multivalued function is computed as a single-valued one with a jump across a cut.

  1. Seam. From the inlet vertex of smallest index, follow the path of steepest ascent of u along edges to the outlet. Since u has no interior maximum, the path is simple and always ends on the outlet.
  2. Jump. Let ω be the 1-form on the edges that is 2π on every edge leaving a seam vertex to one side of the seam, and zero elsewhere. It is closed (it sums to zero around every triangle) and counts how often a path crosses the seam: around the tube, ∮ω=2π.
  3. Harmonic representative. φ minimizes the Dirichlet energyE(φ)=∑ijwij(φj−φi−ωij)2,with wij the cotangent weights [5]. Its minimizer is harmonic, has zero normal derivative on the boundaries (the natural condition) and jumps by 2π across the seam: it is the discrete conjugate, whatever the seam, because two seams give forms that differ by 2π times the indicator of the region between them, which only shifts φ by 2π there. The normal equations are a sparse Laplacian system, solved with one vertex fixed by sparse Cholesky.
  4. Angle. φ modulo 2π.

The weights are the exact cotangent weights. The harmonic field raises negative weights to a small positive floor so that the discrete maximum principle holds, but the angle needs no maximum principle, and raised weights bias the operator by the orientation of the triangles' diagonals: on a jittered cylinder they twist the angle by more than a radian from one end to the other. With the exact weights the twist vanishes: on a cylinder, φ−θ is constant to 10−9 on a structured mesh and to 5⋅10−4 rad on a jittered one.

The exact weights are positive semi-definite as a sum of the Dirichlet energies of the triangles, as long as every triangle is a proper one. Meshes from marching cubes have near-degenerate triangles, whose cotangents are unbounded; bounding them would make their energies indefinite, and leaving them out can cut the mesh in two. The weights are therefore those of the intrinsically mollified mesh (Sharp & Crane [29]): every edge is lengthened by the same δ, the least that gives every triangle a margin of 10−6 mean edge lengths in the triangle inequality, and the cotangents are computed from these lengths. On a mesh without near-degenerate triangles δ=0.

On the straightened wall ​

The conjugate on the wall itself is not quite what a cross-section needs. On a bend the outer side is longer than the inner one, and the conformal angle crowds where the wall is stretched along the vessel. A circular section of a curved tube would then be parametrized unevenly, which costs coefficients for no geometric reason.

The angle is therefore computed on the straightened wall: every vertex is placed at (Lτ,x,y), its vessel coordinates with the centerline (of length L) made straight, where (x,y) are its coordinates in its section plane. Only the weights change; the mesh and the seam are the same. On a circular section centred on the centerline, φ=θ again, whether the vessel is straight or not.

Orientation and origin ​

φ is turned to increase counter-clockwise about the tangent, like θ, and shifted by a constant so that the area-weighted circular mean of φ−θ over the wall is zero. Like θ=0, the origin φ=0 then follows the reference direction of the frame, on average over the vessel. This keeps the angle comparable between the vessels of a cohort.

Accuracy ​

On the synthetic tubes, the angle is monotone around every ring of every preset, including those whose sections are crescents, kidneys or curled lobes. The polar angle runs backwards on between a quarter and all of their rings.

The discrete angle carries tangential noise of the order of the mesh irregularity. The wall fit removes it with a parameter correction: after a first fit, every vertex takes the angle of its nearest point on the fitted wall.

furca — parametric models of blood vessels.